DJMS9

$3,499.00
  • DJMS9

DJMS9

$3,499.00
Enquire


Lean and mean

Meet the DJM-S9, our first two-channel battle mixer for Serato DJ Pro. With a fully configurable Magvel Pro crossfader and customisable FX buttons and pads, you can tailor the mixer to suit your DJing style. The tough DJM-S9 is build to withstand the most energetic scratch performances, and it boasts high-quality audio circuitry inherited from our flagship 4-channel digital mixer, the DJM-2000NXS.

  • Magvel Fader Pro
    Our durable Magvel Fader Pro magnetic crossfader delivers a smooth response. Use the Feeling Adjust dial to change the operational load, then modify the crossfader’s curve and reverse settings to your preference. Plus the mixer comes with shock-absorbing bumpers in 3 materials so you choose your level of rebound.

     

    Performance pads
    Use the highly responsive multi-colour pads to trigger to Hot Cue, Roll, Slice and Loop or map the pads to other Serato DJ Pro functions. The EL display shows which mode is in play, and you can use Serato DJ Pro to allocate colours to modes for an even stronger visual cue.

     

    Customisable FX buttons
    6 Beat FX buttons and 6 Serato DJ Pro FX* buttons, plus 2 banks, give you unprecedented choice. Fire up the pre-set Beat FX or replace them with other popular on-board FX. Map your favourite Serato DJ Pro FX and their parameters to the 6 buttons on the right.
    * Serato DJ Pro offers up to 45 different FX (paid expansion pack needed)

     

    Filter FX
    Rotate the dial to add a high/low pass filter to FX on each channel, or use Serato DJ Pro to switch to other filter FX like Dub Echo, Noise and Pitch.

     

    Style levers
    Quickly turn effects on and off using the 2 large Style Levers. Trigger FX briefly, lock them on, or exit arrangements quickly.

    2 Built-in USB soundcards
    Play back-to-back with other DJs seamlessly using the input switcher on top to switch between all four Serato DJ Pro decks. And if you prefer to play with CDJs or turntables, you can easily do so thanks to DVS support.

    Enhanced MIC input
    The MIC input features Echo FX and high-quality circuitry to eliminate unwanted distortion.
    Clip display
    The clip display shows you when your input levels are too high, while the peak limiter eliminates distortion on the Master output.
    MIDI controller
    This device is fully MIDI assignable via USB. Send control information to external devices and use the mixer as a MIDI controller.
    Melodics
    Pad drumming has become a trend for DJs. Melodics is an app that helps you to learn cue point drumming techniques and build muscle memory for amazing performances. Get it now
    Serato DJ Pro
    Get involved with plug-and-play control of Serato DJ Pro with dedicated buttons for FX and advanced features such as Beat Jump, Slip mode and Quantize. Simply connect your PC/Mac and start playing.
    Serato DVS
    This mixer supports DVS control of Serato DJ Pro software. Plug your PC/Mac into the unit and use the Serato DJ Pro control media – control vinyl or CDs – to intuitively control and scratch with digital audio files stored on your computer.
    Compatible with DVS feature
    Use this product with the rekordbox Core plan or above to make full use of the DVS feature. Find out more.
  • Main Features
    MIDI Control
    Full assignable MIDI controls
    Auto Standby
    Yes
    Compatible DJ Software
    • Unlocks Serato DJ Pro
    • rekordbox (Core plan or above)
    DVS Control
    • Unlocks Serato DVS
    • rekordbox (Core plan or above)
    Software System Requirements
    Windows 8.1/7
    (CPU) Core i3, i5 or i7 1.07 GHz, (Memory) 4GB
    Mac OS X 10.10/10.9/10.8
    (CPU) Core i3, i5 or i7 1.07 GHz, (Memory) 4GB
    Display Resolution
    1280 x 720 or higher
    For more information click here
    What's in the box
    • DJM-S9
    • Power cord
    • USB cable
    • Fader bumper A x 4
    • Fader bumper B x 2
    • Serato DJ CONTROL CD x 2
    • Operating Instructions (Quick Start Guide)
    Specifications
    Rack Mount
    Yes
    Width
    267 mm
    Height
    107.9 mm
    Depth
    407.3 mm
    Weight
    4.6 kg
    Frequency Range
    20 - 20000 Hz
    S/N Ratio USB
    107 dB
    Distortion
    < 0.005 % (USB)
    Master
    Level Meter Size
    9 segment
    Channels
    EQ/ISO
    3 band
    EQ/ISO Range
    -∞ ~ +6 dB
    Reverse Channels
    Yes
    Level Meter Type
    Individual
    Peak Limiter
    Yes
    Performance Control
    Channels
    2
    Sound Colour FX
    • Dub Echo
    • Filter
    • Noise
    • Pitch
    • Wide Filter
    Beat FX
    • Back Spin
    • Delay
    • Echo
    • Fader Synth Saw
    • Fader Synth Sine
    • Fader Synth Square
    • Flanger
    • HP Filter
    • LP Filter
    • Phaser
    • Reverb
    • Roll
    • Spiral
    • Trans
    • Vinyl Brake
    Serato DJ FX powered by iZotope
    Yes
    Effect/Sampler
    3-Band Isolator
    Yes
    Auto BPM Counter
    Yes
    Crossfader
    Crossfader Type
    Magvel Fader Pro
    CURVE Assignable
    Yes
    Reverse Crossfader
    Yes
    Tension Adjustment
    Yes
    Mic
    Mic Connection
    XLR / 1/4-inch Jack Combo
    Talkover
    ON/OFF Button
    Talkover Attenuator
    Yes
    Sound card
    Connection
    USB
    Sample Rate
    24 bit
    Frequency
    48 kHz
    Terminals
    Inputs
    • 2 CD/LINE (RCA)
    • 2 PHONO (RCA)
    • 1 MIC (XLR/Jack Combo)
    • 1 AUX (RCA)
    USB
    2 USB B ports
    Outputs
    • 2 MASTER (XLR, RCA)
    • 1 BOOTH (1/4 inch Jack)
    • 2 HEADPHONE MONITOR (1/4 inch Jack, mini-jack)
  • Different Pioneer products have different warranty periods:

    • Pioneer Car Audio – 3 years
    • Pioneer HiFi – 3 years – products with a disc tray have a 1 year warranty on the disc mechanism and associated parts, and 3 year warranty on other components
    • Pioneer DJ – 3 years for personal / domestic use / 1 year for commercial use

    Please contact our service team on (09) 415 6000 or servicesupport@monacocorp.co.nz to obtain pricing and availability for your part.

    Please check our list of Authorised Retailers [here]. Not all products are available from all locations, and some retailers specialize in certain products, eg. Car Audio, DJ.

    No – Pioneer Carrozzeria is a Pioneer sub-brand manufactured specifically for the local Japanese domestic market. As such, there is no support for other languages or interfaces except for Japanese.

    Possibly – all Pioneer mapping data is provided via a third party external website – Navi Extras. Visit www.naviextras.com and click on the page “Is my device supported?” to check the list of supported devices. Maps of Australia and New Zealand are available for certain devices via download from USD $129.99.

    In the first instance, please contact the retailer or reseller that sold you the product. For additional support, please contact our service team on (09) 415 6000 or servicesupport@monacocorp.co.nz for further advice.

    Note the following troubleshooting tips may help for common issues:

    • Is the product running the most recent firmware or software?
    • Are any devices connected to the product running the lastest version of their firmware or software (ie. are there any outstanding updates to be installed for your connected device?)
    • Are the correct drivers installed?
    • Has the unit be reset or restarted?

    Products requiring service can be sent to our Auckland service centre:

     

                    MONACO CORPORATION LTD

                    Attn: Service Department

                    231 Bush Road

                   Albany

                   Auckland   0632

                   Ph (09) 415 6000

     

    Please be sure to include a summary of the issue, proof of purchase (if the product is under warranty) and your relevant contact details, including address and phone number.