Scratch-style 2-channel DJ controller for Serato DJ Lite (Black)
Join the REVolution
The DDJ-REV1 matches perfectly with the free Serato DJ Lite software, boasting a brand-new battle-style layout that’s easy to use and perfect for playing like a pro. The design of this 2-channel DJ controller emulates a professional DJM-S mixer + PLX turntable setup, including specialized features for open-format and scratch DJs.
- Features
- Specifications
- FAQ
Brand-new battle-style layout
Get hands-on with an interface designed to emulate 2 x PLX turntables and a DJM-S series mixer – the kind of setup used by pro battle DJs. There’s plenty of space to perform mixing and scratching techniques thanks to the new arrangement of the controls on the DDJ-REV1. The tempo sliders are 60mm – longer than those on the DDJ-SB3 to give you finer control – and they run horizontally above the decks while the Performance Pads have been moved into the mixer section so you can intuitively combine effects, trigger samples, and scratch your tracks.
Bigger jog wheels
The bigger the jog wheels, the better for scratching. The jogs on the DDJ-REV1 are the same size as the ones on the DDJ-SR2, a popular controller that’s higher up in our range.
Lever FX
Dynamically add texture to the music with Lever FX. Pull the levers down and hold them to apply effects from Serato DJ Lite in short bursts or push them up to lock on effects and free up your hands for scratching or track browsing.
Tracking Scratch: Get a helping hand with scratching
The Tracking Scratch feature silently takes the music back to the cue point the moment you move the jog wheel from backward to forward or lift your hand away – saving you from closing the fader and finding the right place in the music to start the scratch again. All you need to do is to select the Tracking Scratch Pad mode, press a Performance Pad to choose the Scratch Crossfader Cuts pattern you want to use, then start moving the jog.Mixed microphone audio: Easily add your voice while you’re streaming
For the first time in a Pioneer DJ controller at this level, the output of the master audio is mixed with the sound from the microphone if you have one plugged in. This means you don’t need any external equipment such as a soundcard or separate mixer if you want to add speech or vocals to your performance and route it through your computer. All sounds are sent to Serato DJ Lite so you can stream from there.
Serato DJ Lite integration: Enjoy full use of the free software
As soon as you’ve downloaded Serato DJ Lite to your PC/Mac for free, you can simply connect the DDJ-REV1 via the supplied USB cable and start DJing. Enjoy tactile control of various features and effects in the software by manipulating the buttons, knobs, faders, and jog wheels on the controller.
With the Scratch Bank pad mode, you can instantly load scratch samples from 4 banks that you’ve assigned in Serato DJ Lite or Pro by simply tapping the dedicated Scratch Bank button.
Deck 3/4 control
Play tracks and sounds loaded on any of the 4 decks in Serato DJ Lite.
Support for Serato DJ Pro
Take your performances to the next level with a free trial of Serato DJ Pro paid permanent upgrade available separately)
Class compliant
Plug your DDJ-REV1 into your PC/Mac and start DJing – there’s no need to install an audio driver.
-
Main Features
Compatible DJ Software
-
Serato DJ Lite
-
Serato DJ Pro (License/subscription not included)
Software System Requirements
-
Serato DJ Lite System requirements
-
Serato DJ Pro System requirements
What's in the box
-
DDJ-REV1
-
USB cable
-
Warranty (for some regions)
-
Quick start guide
-
Precautions for use
Specifications
Frequency Range
20 - 20000 Hz
Width
526 mm
Height
59.2 mm
Depth
255.5 mm
Weight
2.1 kg
Soundcard
24 bit/48 kHz
Signal-to-Noise Ratio
103 dB
Distortion
< 0.005 %
Power Supply
USB Type-B bus powered
Power Consumption
5V 500mA
Performance Control
Channels
2
Deck Control
4
Trim knob
Yes
Jog Wheel
154 mm
Filter
Yes
Sampler
Yes
Hot Cues
4
Pad Modes
-
Hot Cue
-
Auto Loop
-
Tracking Scratch
-
Sampler
-
Trans
-
Scratch Bank
Manual Loop
Yes
Autoloop
Yes
Fader
Channel Fader Start
Yes
Crossfader Start
Yes
Crossfader Curve Adjust
Yes
Terminals
Inputs
1 MIC (1/4 inch TS Jack)
Outputs
-
1 MASTER (RCA)
-
1 PHONES (3.5-mm stereo mini jack)
USB
1 USB B port
-
-
Different Pioneer products have different warranty periods:
- Pioneer Car Audio – 3 years
- Pioneer HiFi – 3 years – products with a disc tray have a 1 year warranty on the disc mechanism and associated parts, and 3 year warranty on other components
- Pioneer DJ – 3 years for personal / domestic use / 1 year for commercial use
Please contact our service team on (09) 415 6000 or servicesupport@monacocorp.co.nz to obtain pricing and availability for your part.
Please check our list of Authorised Retailers [here]. Not all products are available from all locations, and some retailers specialize in certain products, eg. Car Audio, DJ.
No – Pioneer Carrozzeria is a Pioneer sub-brand manufactured specifically for the local Japanese domestic market. As such, there is no support for other languages or interfaces except for Japanese.
Possibly – all Pioneer mapping data is provided via a third party external website – Navi Extras. Visit www.naviextras.com and click on the page “Is my device supported?” to check the list of supported devices. Maps of Australia and New Zealand are available for certain devices via download from USD $129.99.
In the first instance, please contact the retailer or reseller that sold you the product. For additional support, please contact our service team on (09) 415 6000 or servicesupport@monacocorp.co.nz for further advice.
Note the following troubleshooting tips may help for common issues:
- Is the product running the most recent firmware or software?
- Are any devices connected to the product running the lastest version of their firmware or software (ie. are there any outstanding updates to be installed for your connected device?)
- Are the correct drivers installed?
- Has the unit be reset or restarted?
Products requiring service can be sent to our Auckland service centre:
MONACO CORPORATION LTD
Attn: Service Department
231 Bush Road
Albany
Auckland 0632
Ph (09) 415 6000
Please be sure to include a summary of the issue, proof of purchase (if the product is under warranty) and your relevant contact details, including address and phone number.